Product Description :
Easy to use Windows 98/2000/XP software:
--Read, Program, Erase Incremental Registers\EEPROM
--Erase time to Delivery State* 1-3 seconds
--Erase time to Delivery State for M35080V6 1-10 minutes
--Supported all clock rates 2.5, 5.0 and 6 MHz IC's.
--In-circuit/On-board EEPROM programming
--On-board EEPROM programming for M35080V6
--Self-Check capabilities
--Onboard processor ATmega16 allow to Firmware --Update to new versions
--4 adaptors for SO8 device
--Additional items you'll need to use this tool:
1) Host: A 32 Bit x86 based or Pentium PC with a free Com1-8 communication port.
2) Power supply: An 12 Volt / 500 mA
NOTE: Delivery State: The first 32
bytes (incremental registers) are set to all "0"s, 16 words at $0000 The
EEPROM memory array $0020-$3FFF set to all $FF. The Status register set
to $10 |
